Kubota KX 161-3 Specifications July 07 2015, 7 Comments
Kubota KX161-3 Overview
These specifications are provide www.MiniExcavatorThumbs.com . If your looking for a thumb attachment for your kx161 check out full inventory of weld on mechanical and hydraulic style thumbs for mini excavators like this Kubota kx161.
I'v always liked Kubota's and they have become very popular with contractors over the past few years. Kubota Dealers have started sprouting up due to popular demand and for good reason. The machines not only look great but are also a great value. They can handle any job a Cat or Deere could handle. With features like a roomy enclose cab, load sensing hydraulics system and a wide working range it's clear why Kubota is such a hot machine right now. For more info on the Kubota KX161-3 click here.
Kubota KX161-3 Specs
Boom/Stick Option (HEX) 1
|
||
A. SHIPPING LENGTH OF UNIT | 18.2 ft in | 5539.7 mm |
C. SHIPPING HEIGHT OF UNIT | 8.3 ft in | 2540 mm |
I. MAX CUTTING HEIGHT | 18.8 ft in | 5715 mm |
J. MAX LOADING HEIGHT | 13.7 ft in | 4165.6 mm |
K. MAX REACH ALONG GROUND | 20.1 ft in | 6121.4 mm |
L. MAX VERTICAL WALL DIGGING DEPTH | 8.5 ft in | 2590.8 mm |
M. MAX DIGGING DEPTH | 12.6 ft in | 3835.4 mm |
Dimensions
|
||
B. WIDTH TO OUTSIDE OF TRACKS | 6.4 ft in | 1955.8 mm |
D. LENGTH OF TRACK ON GROUND | ft in | mm |
E. GROUND CLEARANCE | 1.1 ft in | 320 mm |
G. HEIGHT TO TOP OF CAB | ft in | mm |
Specification
Engine | ||
MAKE | Kubota | |
MODEL | V2403-M | |
NET POWER | 47 hp | 35 kw |
POWER MEASURED @ | 2200 rpm | |
DISPLACEMENT | 148.5 cu in | 2.4 L |
Operational | ||
OPERATING WEIGHT | 11532 lb | 5230.8 kg |
FUEL CAPACITY | 18.5 gal | 70 L |
HYDRAUILC SYSTEM FLUID CAPACITY | 17.7 gal | 67 L |
HYDRAULIC PUMP FLOW CAPACITY | 31.4 gal/min | 118.9 L/min |
Swing Mechanism | ||
SWING SPEED | 9.3 rpm | |
Undercarriage | ||
GROUND PRESSURE | 4.3 psi | 29.4 kPa |
MAX TRAVEL SPEED | 2.9 mph | 4.7 km/h |
Boom/Stick Option (HEX) 1 | ||
SHIPPING HEIGHT OF UNIT | 8.3 ft in | 2540 mm |
SHIPPING LENGTH OF UNIT | 18.2 ft in | 5539.7 mm |
MAX DIGGING DEPTH | 12.6 ft in | 3835.4 mm |
MAX REACH ALONG GROUND | 20.1 ft in | 6121.4 mm |
MAX CUTTING HEIGHT | 18.8 ft in | 5715 mm |
MAX LOADING HEIGHT | 13.7 ft in | 4165.6 mm |
MAX VERTICAL WALL DIGGING DEPTH | 8.5 ft in | 2590.8 mm |
Dimensions | ||
WIDTH TO OUTSIDE OF TRACKS | 6.4 ft in | 1955.8 mm |
HEIGHT TO TOP OF CAB | ft in | mm |
GROUND CLEARANCE | 1.1 ft in | 320 mm |
LENGTH OF TRACK ON GROUND | ft in | mm |
Comments
Anthony - Customer Support - MiniExcavatorThumbs.com on June 20 2017 at 02:41PM
Hi John,
What brand is your thumb attachment? Also I would check to mack sure that the cylinder they sent you is a double acting cylinder. If it is you can try bleeding the air out of the lines and making sure that you have the feed and return connected to the right lines.
It could also be a Float setting on the control or the controls are getting stuck depending on how old the machine is.
Best,
Anthony
JOHND on June 14 2017 at 03:11PM
the thumb on me kx161-3ST will bleed back to open and lock switch will not activate i am unable to find any information on wiring, valve, etc. any help would be great
Nathalie Cloutier on April 27 2017 at 05:38PM
Hello, I have a KX161-3-SS with a thumb and I am looking for the pine that holds the thumb on the bucket. 45mm X 14 3/4 ’’ long that greases as well as bushings., We are in Quebec in Canada
If so, at what price and in what time?
Thank you
Anthony F. - Mini Excavator Thumbs Support on July 13 2016 at 02:21PM
Hey Dusty,
It could be a number of things, where did the old start flowing from? Or did you mean it started to work again?
Thanks,
Anthony
Dusty oferrall on July 13 2016 at 02:33AM
My kx161-3 broke a hydrolic line or fitting , oil blew all over the engine , everything was to hot and smokey to examine , I reached up to push a tree over after I pushed the tree over the oil flowed what do you think happened
Anthony - Mini Excavator Thumbs Team on January 09 2016 at 12:58PM
Hi Chris, we recommend a 32" thumb for this machine based on an operating weight of 11,500 lbs. Here is a link to our measuring instructions to get the most accurate size thumb attachment for your machine http://www.miniexcavatorthumbs.com/pages/mini-excavator-thumb-measuring-instructions
chris phillips on January 04 2016 at 07:59AM
What size fully hydraulic thumb would I need for a 24" bucket on a kx161-3?