Komatsu PC27MR-2 Mini Excavator Specifications September 06 2016, 0 Comments

Komatsu PC27MR-2 Excavator 

This 6,500lb. Mini is perfect for traveling from job site to job site. With minimal tail swing it allows a operator to get in hard to fit places that cause issues for some larger mini's. A popular choice among Komatsu's line of compact excavators. 

Check out the video above to see the PC27MR-2 in action. 

Like any piece of equipment purchasing the proper attachment for a job can make your job that much easier. Especially a Thumb Attachment like the 24"x7" Hydraulic thumb from www.MiniExcavatorThumbs.com .We recommend installing a 24" Thumb Attachment on the Komatsu PC27MR-2. A high quality attachment made right here in America can be exactly what you need.

PC27MR-2 Dimensions

Boom/Stick Option (HEX) 1
A. SHIPPING LENGTH OF UNIT 14.2 ft in 4320 mm
C. SHIPPING HEIGHT OF UNIT 8.3 ft in 2530 mm
I. MAX CUTTING HEIGHT 14.8 ft in 4500 mm
J. MAX LOADING HEIGHT 10.6 ft in 3230 mm
K. MAX REACH ALONG GROUND 14.9 ft in 4550 mm
L. MAX VERTICAL WALL DIGGING DEPTH 7.2 ft in 2185 mm
M. MAX DIGGING DEPTH 8.7 ft in 2650 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 5.1 ft in 1550 mm
D. LENGTH OF TRACK ON GROUND 4.8 ft in 1485 mm
G. HEIGHT TO TOP OF CAB 8.3 ft in 2530 mm
H. TAIL SWING RADIUS 3.2 ft in 955 mm
O. COUNTERWEIGHT CLEARANCE 1.8 ft in 545 mm
Undercarriage
F. TRACK GAUGE 4.1 ft in 1250 mm
N. SHOE SIZE 11.8 in 300 mm

Specification for PC27MR-2

Engine
MAKE Komatsu
MODEL 3D82AE
GROSS POWER 25.5 hp 19 kw
POWER MEASURED @ 2600 rpm
DISPLACEMENT 81 cu in 1.3 L
Operational
OPERATING WEIGHT 6590 lb 2990 kg
FUEL CAPACITY 11.6 gal 44 L
HYDRAUILC SYSTEM FLUID CAPACITY 7.9 gal 30 L
ENGINE OIL CAPACITY 1.5 gal 5.7 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 40 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 3555 psi 250 kPa
HYDRAULIC PUMP FLOW CAPACITY 20 gal/min 75.6 L/min
Swing Mechanism
SWING SPEED 9.2 rpm
Undercarriage
SHOE SIZE 11.8 in 300 mm
NUMBER OF CARRIER ROLLERS PER SIDE 1
NUMBER OF TRACK ROLLERS PER SIDE 4
GROUND PRESSURE 4.3 psi 29.6 kPa
MAX TRAVEL SPEED 2.9 mph 4.6 km/h
DRAWBAR PULL 7055 lb 31.4 kN
TRACK GAUGE 4.1 ft in 1250 mm
Buckets
REFERENCE BUCKET CAPACITY 0.1 yd3 0.08 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 Standard
SHIPPING HEIGHT OF UNIT 8.3 ft in 2530 mm
SHIPPING LENGTH OF UNIT 14.2 ft in 4320 mm
MAX DIGGING DEPTH 8.7 ft in 2650 mm
MAX REACH ALONG GROUND 14.9 ft in 4550 mm
MAX CUTTING HEIGHT 14.8 ft in 4500 mm
MAX LOADING HEIGHT 10.6 ft in 3230 mm
MAX VERTICAL WALL DIGGING DEPTH 7.2 ft in 2185 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 5.1 ft in 1550 mm
HEIGHT TO TOP OF CAB 8.3 ft in 2530 mm
COUNTERWEIGHT CLEARANCE 1.8 ft in 545 mm
TAIL SWING RADIUS 3.2 ft in 955 mm
LENGTH OF TRACK ON GROUND 4.8 ft in 1485 mm



New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Mini+Excavator&make=Komatsu&model=PC27MR-2&modelid=92763#ixzz4JW3QUbK6